CVE Database

Payload is a free and open source headless content management system. Payload versions from 3.0.0 before 3.90.0 and canary versions from 4.0.0-canary.0 before 4.0.0-canary.34 use a lower-than-recommended PBKDF2 work factor for password hashing, reducing the computational effort required to test recovered password hashes. This issue is fixed in versions 3.90.0 and 4.0.0-canary.34.

Dell Container Storage Modules, versions prior to 1.18.0, contain(s) an Use of Hard-coded Credentials vulnerability in the csm-docs. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to Information disclosure.9.8

Allocation of resources without limits or throttling vulnerability in ESET PROTECT On-Prem increased resource consumption (CPU and RAM), leading to conditions for a Denial-of-Service attack.

An OS command injection vulnerability in the shell-based temporary-file cleanup instructions in Progress Software Autonomous REST Connector GenAI Agents ARCGenAI-Generator version 2.0 allows an attacker who supplies a crafted Swagger/OpenAPI document to execute arbitrary commands on a developer's machine when a user invokes the generator.

Improper neutralization of special elements used in an OS command ('OS command injection') vulnerability in Felisify Information Technologies Industry and Trade Inc. SambaBox allows OS Command Injection. This issue affects SambaBox: before 5.4.1.

Improper Control of Interaction Frequency vulnerability in Pusula Communication, IT, and Internet Industry and Trade Co. Ltd. Expert Mail allows Brute Force. This issue affects Expert Mail: through 2026-09-18.

Improper input validation vulnerability in Johnson Controls Illustra Standard - L4L China on Windows allows OS Command Injection. This issue affects Illustra Standard - L4L China: before 6.0.0.66394.

Improper neutralization of input during web page generation ('cross-site scripting') vulnerability in Akıllı Ticaret Software Technologies Ltd. Co. E-Commerce Pack allows Reflected XSS. This issue affects E-Commerce Pack: through 2026-10-06. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Mooncake Store master through 0.3.13.post1 contains a missing authorization vulnerability that allows unauthenticated attackers to erase any object's disk replica via EvictDiskReplica and BatchEvictDiskReplica. Attackers reaching the coro_rpc master port can evict DISK replicas across all tenants, deleting objects whose only remaining replica is on disk.

lrzsz before 0.13.0 contains a heap-based buffer overflow vulnerability in procheader() of the lrz receive utility when copying overlong sender-supplied filenames into Pathname. Malicious ZMODEM senders can supply filenames up to 8192 bytes, overflowing the buffer via sprintf() in pipe mode or strcpy() to corrupt heap memory and crash lrz.

libmikmod before 3.3.14 contains an integer overflow vulnerability in DSM_Load() in load_dsm.c that allows attackers to trigger heap buffer overflow via crafted track counts. Attackers can supply a DSM module whose numchn and numpat product wraps a 16-bit value, overwriting heap memory to cause crashes or potential code execution.

Cross-site Scripting (XSS) in the Forums feature of OpenText Content Management Content Server could allow a bad actor to inject malicious code into a Forums web page.

Craft CMS 5.10.13.2 contains an authenticated remote code execution vulnerability in the Control Panel action app/render-components. Any authenticated user with basic Control Panel access can submit request-controlled component classes and property overrides. By first overriding an EntryType object’s uiLabelFormat and then rendering an Entry that resolves the same request-cached entry type, an attacker can cause arbitrary Twig supplied in the request to be evaluated by renderObjectTemplate(). This render path is not sandboxed. A Twig string callable can therefore reach PHP functions such as system(), resulting in operating-system command execution with the privileges of the PHP/web-server process. The issue was reproduced with an active non-admin Craft Team user with no optional permissions enabled. No access to entry-editing, Settings, utility, user-management, project-config, filesystem, Kubernetes, or environment variables was required.

In the WibuKey driver for Windows below Version 6.72, insufficient validation of user input when calculating the size of a kernel buffer could cause small amounts of data to be written outside the intended kernel buffer. This can lead to a system crash. Under unfavorable circumstances, adjacent kernel memory may be modified.

In the Linux kernel, the following vulnerability has been resolved: xfrm: iptfs: fix stack OOB read in iptfs_skb_reset_frag_walk() iptfs_skb_reset_frag_walk() advances to the fragment containing @offset with an unbounded loop: while (offset >= walk->past + walk->frags[walk->fragi].len) walk->past += walk->frags[walk->fragi++].len; walk->fragi is advanced and walk->frags[walk->fragi] is dereferenced without ever checking fragi against walk->nr_frags. When the requested offset is at or beyond the total length spanned by the walk's fragments, fragi runs past nr_frags and off the end of the fixed-size on-stack frags[MAX_SKB_FRAGS + 1] array, reading out-of-bounds stack memory. The two callers behave differently: iptfs_skb_add_frags() already guards against this with if (!walk->nr_frags || offset >= walk->total + walk->initial_offset) return len; but iptfs_skb_can_add_frags() has no such guard and calls iptfs_skb_reset_frag_walk() unconditionally, so it performs the out-of-range walk. Its own "fragi < walk->nr_frags" bound check runs only afterwards, too late to prevent the read. This is reachable from the receive path: a crafted IP-TFS (AGGFRAG) payload delivered to an IPTFS SA drives iptfs_reassem_cont() -> iptfs_skb_can_add_frags() with an offset past the fragment total, e.g.: BUG: KASAN: stack-out-of-bounds in iptfs_skb_reset_frag_walk+0x235/0x250 Read of size 4 at addr ffff888008ad7210 by task repro/345 iptfs_skb_reset_frag_walk+0x235/0x250 net/xfrm/xfrm_iptfs.c:392 iptfs_skb_can_add_frags+0x155/0x310 net/xfrm/xfrm_iptfs.c:420 iptfs_reassem_cont+0xcf8/0x1140 net/xfrm/xfrm_iptfs.c:902 iptfs_input_ordered+0x552/0x670 net/xfrm/xfrm_iptfs.c:1280 iptfs_input+0x3d6/0xde0 net/xfrm/xfrm_iptfs.c:1741 xfrm_input+0x282f/0x6140 net/xfrm/xfrm_input.c:700 xfrm4_esp_rcv+0x93/0x120 net/ipv4/xfrm4_protocol.c:104 ip_rcv+0x278/0x2d0 net/ipv4/ip_input.c:612 Give iptfs_skb_can_add_frags() the same up-front guard that iptfs_skb_add_frags() already has, so the walk is never entered with an out-of-range offset. When it triggers, the caller falls back to the existing linearize-and-copy path, which is safe.

In the Linux kernel, the following vulnerability has been resolved: xfrm: iptfs: fix runt reassembly panic from short inner tot_len When the start of an inner packet is split across two outer packets such that fewer than 4 bytes land at the end of the first one, __input_process_payload() saves those bytes as a runt and skips the iplen/iphlen validation performed for in-place packets. When the continuation packet arrives, iptfs_reassem_cont() only requires the declared inner length to be >= sizeof(ra_runt) (6) before allocating the reassembly skb with that attacker-controlled length. However, __iptfs_iphlen() always returns the fixed minimum IP header size (20 for IPv4, 40 for IPv6), so for an inner IPv4 tot_len in [6, 19] the header-completion copy writes past the declared packet length, and the subsequent "ipremain -= copylen" underflows to ~4GB, leaving the payload copy length bounded only by blkoff (up to 64KB). At runtime the skb_put() tailroom check turns this into skb_over_panic(), i.e. an unprivileged kernel panic (DoS), reachable locally via userns+netns IPTFS SAs and remotely against IPTFS VPN gateways when the decrypted outer skb is linear (e.g. AF_PACKET taps, tun/tap delivery). Align the runt path with the normal path by requiring the declared inner length to cover at least the IP header size. This also subsumes the previous >= sizeof(ra_runt) check, since the minimum IP header is always larger than the runt buffer. This issue was found by the autokbug dynamic kernel fuzzer at Tencent Yunding Lab.

In the Linux kernel, the following vulnerability has been resolved: xfrm: fix compat ALLOCSPI request use-after-free xfrm_state_netlink() builds the ALLOCSPI response with dump_one_state(), which already calls alloc_compat() with the response skb and header. xfrm_alloc_userspi() then calls alloc_compat() again, but passes the original request skb and its header. For a compat request, the translator therefore interprets the 228-byte compat xfrm_userspi_info as the 232-byte native layout and reads four bytes past the declared payload. It also publishes the translated child through the request's frag_list. A multicast clone of the request shares skb_shared_info and can observe that child. xfrm_user_rcv_msg() frees it after the request handler returns, racing a compat receiver which may still be copying from it and resulting in a use-after-free. Remove the redundant conversion. The response keeps its correct compat translation from dump_one_state(), and no child is attached to the inbound request.

In the Linux kernel, the following vulnerability has been resolved: xfrm: add missing rcu_read_lock(), skb_dst_force() and dev_hold() for xfrm_trans_reinject() syzbot reported a suspicious RCU usage warning in ip6_pkt_drop(): WARNING: suspicious RCU usage in ip6_pkt_drop include/net/addrconf.h:389 suspicious rcu_dereference_check() usage! Call Trace: __in6_dev_get_safely include/net/addrconf.h:389 [inline] ip6_pkt_drop+0x596/0x610 net/ipv6/route.c:4620 ip6_pkt_discard+0x1c/0x30 net/ipv6/route.c:4651 xfrm_trans_reinject+0x324/0x630 net/xfrm/xfrm_input.c:806 process_one_work kernel/workqueue.c:3322 [inline] process_scheduled_works+0xa8e/0x14e0 kernel/workqueue.c:3405 worker_thread+0xa47/0xfb0 kernel/workqueue.c:3486 When commit 4f4920669d21 ("xfrm: Reinject transport-mode packets through workqueue") converted xfrm_trans_reinject from a tasklet to a workqueue, the reinjection loop ceased running in softirq context. Workqueue workers run in process context where local_bh_disable() does not enter an RCU read-side critical section under CONFIG_PREEMPT_RCU. Because finish callbacks (such as ip6_rcv_finish) expect to run under an RCU read lock (performing route lookups, l3mdev lookups, and accessing RCU-protected data structures), invoking them in workqueue context without rcu_read_lock() triggers RCU lockdep warnings. Furthermore, packets queued to the workqueue via xfrm_trans_queue_net() may carry non-refcounted (noref) dst entries (e.g. from ip_route_input_noref). Additionally, on netdevice unregistration, dst_dev_put() replaces dst->dev with blackhole_netdev, so dst entries do not keep skb->dev alive while queued in the workqueue. Fix these issues by: 1. Calling skb_dst_force(skb) in xfrm_trans_queue_net() while still in the caller's RCU section to ensure dst is reference-counted before queuing. 2. Holding a reference on skb->dev via dev_hold()/dev_put() across workqueue deferral so skb->dev remains valid during finish() callback processing. 3. Acquiring rcu_read_lock() around the finish callback invocation loop in xfrm_trans_reinject().

In the Linux kernel, the following vulnerability has been resolved: esp: downgrade zerocopy managed frags before mutating skb frags On the out-of-place output path (esp->inplace == false) ESP rewrites the skb frag array: esp_output_head() appends a trailer frag and esp_output_tail() replaces the frags with a destination page, both referenced with get_page(). When the skb carries zerocopy managed frags (SKBFL_MANAGED_FRAG_REFS) the payload frags are owned by the ubuf and must not be referenced or unreferenced individually, but ESP mutates the frag array without ever downgrading the skb. This breaks the managed-frag invariant two ways: - esp_ssg_unref() walks the source scatterlist and drops a page reference for every frag, including the ubuf-owned payload frags, pushing their refcount below the GUP pin bias while the pages are still pinned, i.e. a use-after-free of the zerocopy pages; - esp_output_tail() installs its destination page as frag 0 with get_page() but leaves SKBFL_MANAGED_FRAG_REFS set, so skb_release_data() takes the skip_unref branch and never drops that reference, leaking the x->xfrag page at packet rate. Fix this the way every other frag-mutating site does (__ip_append_data(), __ip6_append_data(), tcp_sendmsg_locked()) and call skb_zcopy_downgrade_managed() before ESP touches the frag array: it takes a real reference on each existing frag and clears SKBFL_MANAGED_FRAG_REFS, so the per-frag unref in esp_ssg_unref() and the frag release in skb_release_data() are both balanced and no mixed-ownership frag array is left behind.

In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: Clear association under lock if siw_qp_modify fails in siw_accept We need to clear cep before release state_lock as siw_qp_llp_close and siw_qp_modify->siw_qp_llp_close did. Otherwise if siw_qp_modify() fails in siw_accept(), the QP's state_lock is released before the error path cleanup. A concurrent ibv_modify_qp() transitioning the QP to ERROR can race in this window: siw_accept() ibv_modify_qp(ERROR) ---------------------- ---------------------- siw_qp_modify() fails up_write(&qp->state_lock) down_write(&qp->state_lock) nextstate_from_idle(): if (qp->cep) siw_cep_put(qp->cep) <- frees cep qp->cep = NULL goto error cep->qp = NULL <- UAF Clear qp->cep and drop the association reference taken by siw_cep_get(), all under the write lock held from the initial down_write(&qp->state_lock). Thread B therefore sees qp->cep == NULL, skips its own put, and cannot free the cep before siw_accept() is done with it.

In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: validate access flags before swapping the MR's PD rxe_rereg_user_mr() reassigns mr->ibmr.pd first and only then validates the IB_MR_REREG_ACCESS argument: if (flags & IB_MR_REREG_PD) { rxe_put(old_pd); rxe_get(pd); mr->ibmr.pd = ibpd; } if (flags & IB_MR_REREG_ACCESS) { if (access & ~RXE_ACCESS_SUPPORTED_MR) return ERR_PTR(-EOPNOTSUPP); mr->access = access; } Both flags pass the entry check because RXE_MR_REREG_SUPPORTED is IB_MR_REREG_PD | IB_MR_REREG_ACCESS, so a caller can reach the access check with mr->ibmr.pd already reassigned. mr->ibmr.pd is owned by the core, which adjusts pd->usecnt only on the success path: ib_uverbs_rereg_mr() jumps to put_new_uobj on a driver error without undoing the reassignment, so mr->pd == new_pd while the usecnts still charge the MR to orig_pd. ib_dereg_mr_user() then decrements new_pd, whose count can reach zero while a memory window still references it; uverbs_free_pd() frees the PD on that count alone and rxe_mw_cleanup() writes to freed memory: BUG: KASAN: slab-use-after-free in __rxe_put+0x31/0xa0 Write of size 4 at addr ffff8881301dd690 by task rxe_poc/591 __rxe_put+0x31/0xa0 rxe_mw_cleanup+0x42/0x200 __rxe_cleanup+0x115/0x370 rxe_dealloc_mw+0x4c/0x80 Allocated by task 591: ib_uverbs_alloc_pd+0x258/0x540 Freed by task 591: ib_dealloc_pd_user+0x174/0x210 uverbs_free_pd+0x8d/0xc0 ib_uverbs_dealloc_pd+0x18e/0x1d0 Validate the access flags before mutating any state so the callback either applies every requested change or none.

In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix integer overflow in mr_check_range() leading to OOB access mr_check_range() validates that [iova, iova+length) falls within the registered MR range using wraparound-prone arithmetic: if (iova < mr->ibmr.iova || iova + length > mr->ibmr.iova + mr->ibmr.length) A remote peer can craft an RDMA-Write/Read RETH so that iova + length wraps to 0 (e.g. iova=0xfffffffffffffff8, length=8), bypassing the check. rxe_mr_iova_to_index() then computes a huge index (int idx, only guarded by WARN_ON) and rxe_mr_copy_xarray() dereferences mr->page_info[huge], causing an out-of-bounds read/write and a kernel oops that is triggerable by an unauthenticated remote peer. Rewrite the check in overflow-safe form; the first two clauses guarantee that the subsequent subtractions do not underflow: if (iova < mr->ibmr.iova || length > mr->ibmr.length || iova - mr->ibmr.iova > mr->ibmr.length - length) With the fix, mr_check_range() returns -EINVAL for the crafted iova and the responder reports REMOTE_ACCESS_ERROR instead of triggering the OOB.

In the Linux kernel, the following vulnerability has been resolved: xfrm: hold net_device reference under RCU in bundle creation xfrm_bundle_create() and xfrm_create_dummy_bundle() read dst->dev into a local pointer without taking a device reference, then pass it to xfrm_fill_dst(). A concurrent RTM_DELLINK replaces dst->dev via dst_dev_put() and frees the old net_device, causing a use-after-free when xfrm6_fill_dst() later dereferences the stale dev pointer. BUG: KASAN: slab-use-after-free in xfrm6_fill_dst+0x82c/0x860 (net/ipv6/xfrm6_policy.c:86 netdev_hold()) Read of size 8 at addr ffff8880142fe588 by task exploit/153 Call Trace: xfrm6_fill_dst+0x82c/0x860 xfrm_resolve_and_create_bundle+0x21d4/0x2bd0 xfrm_lookup_with_ifid+0x485/0x1640 ip6_dst_lookup_flow+0x19b/0x1e0 udpv6_sendmsg+0x1443/0x2dd0 Fix this by reading dst->dev via dst_dev_rcu() and keeping the RCU read-side critical section active until xfrm_fill_dst() has taken the required device references.

In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scpi: reject DVFS OPP count above MAX_DVFS_OPPS scpi_dvfs_get_info() already rejected a zero opp_count, but still trusted any larger value from the SCP firmware. The shared-memory reply only holds MAX_DVFS_OPPS entries in buf.opps[]; a bigger count over-reads that array and then sizes the allocated OPP table incorrectly (garbage OPPs / OOB). The missing upper bound dates back to the original SCPI DVFS support. Reject zero and out-of-range counts in one check and return -EINVAL.

In the Linux kernel, the following vulnerability has been resolved: clk: scpi: bound-check DVFS index in scpi_dvfs_recalc_rate dvfs_get_idx() may return an out-of-range index if the SCP firmware is buggy or returns a stale value. Only negative indexes were rejected, so a large index walked past info->opps and could treat garbage as a clock rate (KASAN OOB / wrong frequency to consumers). The missing upper bound dates back to the original SCPI clock driver. Treat indexes >= opp count as invalid and return 0, same as idx < 0.